Ceramic Protecting Tube Assembly - Angle Type For Molten Metals
Calibration
Element * Gauge
Style
Hot Leg ** Material
Ordering Code
Type
Head
Cold Leg Length
Hot Leg Length
Type N
Nicrosil - Nisil
8 AWG.
1
SCT (Silicon Carbide)
N8SC
Select
from
table
below.
Specify
in
inches.
14 AWG.
N14SC
8 AWG.
2***
C30 Ceramic
C98 Ceramic
N8C30
N8C98
14 AWG.
C30 Ceramic
C98 Ceramic
N14C30
N14C98
Type K
Chromel - Alumel
8 AWG.
1
SCT (Silicon Carbide)
K8SC
14 AWG.
K14SC
8 AWG.
2***
C30 Ceramic
C98 Ceramic
K8C30
K8C98
14 AWG.
C30 Ceramic
C98 Ceramic
K14C30
K14C98
* Selection of a head from table below will determine whether a single or dual element is furnished.
** Click here for characteristics of ceramic tubes.
*** The hot leg tube of style 2 assemblies has a 3/4" NPT male thread as standard. It is not normally required for this type of assembly, but is provided so that standard tubes can be used for fabrication.
Terminal Head Options
Head
Terminal Block
Specify
Cast Iron Screw Cover
Single
Dual
A AD
Cast Aluminum Screw Cover
Single
Dual
B BD
How to order:
Select the desired calibration, wire size, style and hot leg material from the first 4 columns of the table. Specify by "Type" under ordering code.
Select desired terminal head from table above and place its letter code next.
Place the desired "Cold Leg" length (in inches) next.
Place the desired "Hot Leg" length (in inches) next.
