|
• Miniature plugs and jacks provide dependable, quick
connections and easy installation of fine thermocouple wire
and sheath. Accepts wire from .001" diameter to 20 gauge.
• Polarized pins make it virtually impossible to mismate. Large
Double wipe jack inserts assure tight grip and low signal loss.
Due to exclusive isolated screw design, contact is all
thermocouple alloy from wire entrance to wire exit. ANSI
calibration symbol and polarity symbol are molded on
connector face.
• Alloys of prongs and inserts match ANSI calibrations to
maintain sensing accuracy. Alloy and polarity are identified by
symbols molded into body.
How To Order:
Select the desired connector and replace
the(*) with calibration code.
Example: 6002K
|
| Standard - Miniature |
| Part Number |
Description |
| 6002(*) |
Female Plug |
| 6008(*) |
Female Jack |
| High -Temp-Miniature |
| Part Number |
Description |
| 6032H(*) |
Female Plug |
| 6038H(*) |
Female Jack |
|
| |
|
• 2-Pole Connector plugs and jacks are made to exacting
specifications to provide rapid, dependable connections between
thermocouples and extension wires.
• Alloys of prongs and inserts match ANSI calibrations to maintain
sensing accuracy. Alloy and polarity are identified by symbols
molded into body.
• Inserts are spring loaded collet type to assure positive full
contact with the negative insert larger making it virtually
impossible to mismate.
• Connector bodies molded of glass filled thermoset compounds
(will not melt) for high strength and dependability. The color
coded connectors will withstand ambient temperatures to 400° F
(205° C) continuous and 500° F (260° C) intermittent. High-
Temperature connectors will withstand ambient temperatures to
800° F (425° C) continuous and 1000° F (540° C) intermittent.
(All Hi-Temp are color coded rust.
How To Order:
Select desired connector and specify the Part
Number followed by Calibration Code.
Example: 6000J
|
| Standard - 2-Pole |
| Part Number |
Description |
| 6000 (Calib.) |
Std. Female Plug |
| 6001 (Calib.) |
Solid Pin Plug |
| 6005 (Calib.) |
Female Jack |
| High-Temperature - 2-Pole |
| Part Number |
Description |
| 6020 (Calib.) |
Std. Female Plug |
| 6021 (Calib.) |
Solid Pin Plug |
| 6025 (Calib.) |
Female Jack |
|
| Calib. Code |
| J |
| T |
| K |
| N |
| R |
| S |
| E |
| *CU |
| WR |
| W5 |
|
|
Single circuit jacks designed for mounting into control panel or
instrument case can be wired and installed completely from the
front. Fits in standard 3/4" knockout (1 1/8" diameter).
Permanently attached self-fastening device simplifies mounting,
holds tight.
| Style |
Description |
Part Number |
| 1 |
Standard 2-Pole Jack w/Nickel Plated Steel Fram
Fits 3/4" Knock-Out |
6007M (x) |
| 2 |
Standard 2-Pole Jack- Molded Polypropylene Body
Fits Knock-Out 3/4" Max. Temp: 300 O F |
6007P (x) |
| 3 |
Miniature 2-Pole Jack w/Nickel Plated Steel
Fits 3/4" Knock-Out |
6052 (x) |
